Voltage Range
24V DC
Cut Points
10 cm
LED Strip Installation
10 m
Type Of Dimming
Controller SPI
IP Rating
IP67
Dimensions
7 mm x 12 mm x 10000 mm
Width
12 mm
Height
7 mm
Fitting Material
PCB
Colour Rendering Index
80
Dimmable
Yes
Ref. Ledkia: 104722
Colour Temperature : Warm White 3000K
Before £43.99
£32.69
VAT includedIn Stock, delivery in 15-20 days
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentSee alternatives
Dimensions
Downloads
Technical Data Sheet PDF
Certificates and Stamps
Technical Specifications
Technical Information
Product Information
Product Data
The Monocolour Digital LED Strip SPI 24V DC 120LED/m 10m IP67 Width 10mm Cut every 10cm, which provides efficient and bright lighting. With a total of 120 chips LED per metre, it offers intense and uniform lighting for any application.
This LED strip operates at a voltage of 24V, ensuring low energy consumption and greater efficiency compared to other voltage options. Additionally, it has an IP67 rating, making it resistant to dust and water, allowing for use indoors and outdoors without worry.
Furthermore, the LED strip is equipped with the WS2811-Monocolour chip, which allows for individual control of each LED. This means that the colour and intensity of each LED can be adjusted independently, providing a wide range of personalised lighting options and dynamic effects.
In summary, the LED strip with 2835 chips is a versatile option for interior lighting projects. With its 24V voltage and individual control capability, it provides bright and customisable lighting for a variety of applications.
* It is important to note that digital controllers for LED strips can only handle a single data output line. If you wish to connect two or more digital LED strips from the same controller, you will need a digital signal splitter that you can find in accessories.
*LED strips should never be powered on when rolled up, as this could cause overheating and burn out the LEDs.
*If you are going to install more than 5 continuous metres of this LED strip, it is necessary to cut the jack connector and make a direct connection.
*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.