Diameter
106 mm
IP Rating
IP20
Dimensions
52 mm x Ø106 mm
Height
52 mm
Fitting Material
PC
Ref. Ledkia: 89840
Colour : White
£94.99
VAT includedPre-Order, estimated delivery from 10 weeks
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentSee alternatives
Dimensions
Downloads
Technical Data Sheet PDF
Certificates and Stamps
Technical Specifications
Technical Information
Product Data
The DALI PIR Motion and Twilight sensor is a device designed for installations using the DALI (DIGITAL ADRESABLE LIGHTINGH INTERFACE) control protocol. It is a dimming protocol defined under the European standard IEC62386. Control signals are sent and received via a power supply BUS.
This device has a PIR detector (PASSIVE INFRARED SENSOR) which sends an ON signal to the luminaires when it detects movement. It also has a twilight sensor that detects the absence of light necessary to send a signal via the DALI BUS to the luminaires.
To be able to use the sensor it is essential to use DALI MASTER Controller, connected to the same BUS provided by a DALI power supply.
It is possible to select the sensor mode, either motion, twilight or both, to assign a device or group to each sensor and to set the minimum brightness for the luminaires to switch on and the switch-on time. This requires a DALI Master Netwok Host to program the device.
You can also configure the sensor to only switch on the assigned luminaires if the brightness drops below a set level and it detects movement, so that the luminaires are only switched on when they are needed, multiplying the savings achieved.
*A DALI MASTER Controller is required for use.
*A DALI Master Netwok Host is required to configure the device, otherwise it comes with factory-defined settings.
*The light threshold range for the twilight sensor is 10-650 lx.
*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.