PIR Motion Sensor + Bluetooth for UFO HBM LED Highbay IP65

The PIR Motion Sensor is an innovative solution designed to improve the safety and energy efficiency of the HBM UFO Industrial LED Hood, as its design allows it to adapt perfectly to this type of lighting.

With a detection angle of 120º and a range of up to 3 metres, this sensor has the ability to identify movement in any direction and activate the hood when necessary. Unlike RADAR motion sensors, which are activated when they detect any kind of movement, the PIR sensor does so only when the movement comes from a heat source, which means significant energy savings. This sensor allows the lights to be switched on or off automatically, optimising energy use and improving security. The configuration and customisation of this sensor is done conveniently through the Tuya app, which connects to the sensor via Bluetooth. This can be downloaded from the App Store and Google Play respectively.

This allows users to easily adjust sensitivity, delay time, and other parameters from the palm of their hand, providing intelligent and adaptive control to the specific needs of the work area. In addition, its IP65 protection factor ensures that it can be used both outdoors and indoors. This, together with the possibility of controlling it via Bluetooth, makes it a perfect choice for any type of Industrial  UFO HBM LED Highbay.

You can perform the following actions via Bluetooth and the TUYA APP:

- Switching the luminaire on and off

- Dim the luminaire from 10% to 100%.

- Detection area 25%/50%/75%/75%/100%.

- Switch-on time after detection (Holdtime)

5s/30s/1min/3min/5min/10min/15min/20min/25min/30min/45min/60min/90min/120min

- Daylight threshold:

Disable/2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/200Lux/250Lux/300Lux/350Lux/400Lux

- Standby dimming level 10%/20%/30%/50% Standby period

- Standby period 0s/10s/30s/1min/5min/10min/30min/30min/60min/+∞

* The configuration and customisation of the bluetooth sensor is done through the Tuya application available on all smartphones. To add the device, simply switch on the hood, open the APP with the phone's bluetooth switched on and wait for the APP to automatically detect the sensor.