Wattage
7 W
Voltage Range
220-240V AC
Power Factor
0.9
IP Rating
IP20
Dimensions
30 mm x 45 mm x 210 mm
Width
45 mm
Height
30 mm
Battery Capacity
2200 mAh
Autonomy
15 h
Ref. Ledkia: 6530
5 out of 5 stars
Wattage : 7 W
£66.99
VAT includedIn Stock, delivery in 24/48h
Buy before 2:30 pm we’ll ship it today.
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentSee alternatives
Dimensions
Downloads
Technical Data Sheet PDF
Certificates and Stamps
Technical Specifications
Technical Information
Product Data
Product Information
The main function of the Emergency Kit for Permanent/Non-Permanent LED Luminaires is to provide power in the event of a power failure for any type of LED luminaire such as watertight screens or panels. It maintains the autonomy of the luminaire on for up to 90 minutes. It can work with any kind of LED light, from 200W UFO High bays to 40W panels.
This module can be configured in two different ways.
1 - As a permanent emergency light luminaire:
Installation: Connect the driver of the light fitting to the emergency module following the installation diagram. It is very important to comply with cable polarity.
Operation: The mains current supplies the luminaire and charges the module's battery at the same time. When the luminaire is switched off, it is permanently switched on and is supplied by the battery with 7Wof power.
2 - As a non-permanent emergency light luminaire:
Installation: Connect the input of the emergency module to the mains power supply where the emergency lighting is connected. Connect the input of the luminaire driver in to the mains.
The output of the light fitting's driver is connected to the overhead connections of the emergency module. The luminaire input (without driver) is connected to the lower part of the emergency module connections. It is important to comply with the polarity of the cables.
Operation: The emergency network charges the battery and in the event of a power failure, the Emergency Module is given the signal to automatically switch on the luminaire using the battery.
Characteristics of the Emergency Kit for Permanent/Non-Permanent LED Luminaires
* When the Universal Emergency driver is fitted with Luminaires with Built-in Drivers that are not detachable, it can only work in permanent light mode.
*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.