220V AC RGB LED Strip 60LED/m with IR Remote Control Cut at Every 100cm Custom Length

The 220V AC 60 LED/m IP65 RGB LED Strip with IR Remote Control Custom Cut Every 100cm does not require any power supply as it is connected directly to the mains via a rectifier cable. Its flexibility allows it to adapt to almost any surface.

Characteristics of the 220V AC 60 LED/m IP65 RGB LED Strip with IR Remote Control Custom Cut Every 100cm

The 60 LED/m SMD5050 LED strip consumes only 10W per meter. Manufactured with top quality materials, it has the maximum protection against solid external agents and a magnificent protection against liquids that are summarized in its IP65 protection factor making it suitable for both indoor and outdoor use.

The 220V AC 60 LED/m IP65 RGB LED Strip with IR Remote Control Custom Cut Every 100cm includes a rectifier cable and a strip end cap, accessories that are recommended to protect properly so that the IP65 protection is not compromised. A maximum of 20 metres of LED strip can be connected to one rectifier. In addition, it includes an IR Remote Control to control your strips easily and quickly.

If you are going to cut the strip you have to take into account that the220V AC 60 LED/m IP65 RGB LED Strip with IR Remote Control Custom Cut Every 100cm can only be cut in complete runs at every meter, exclusively on the enabled area.

Applications of the 220V AC 60 LED/m IP65 RGB LED Strip with IR Remote Control Custom Cut Every 100cm

The versatility of this type of LED lighting makes it widely used as secondary lighting and/or decorative element on facades, ceilings, showcases and cabinets, shelves, shop windows, pictures and mirrors and even for the marking of stairs and corridors. The options are endless.

Characteristics of the IR Remote Control

This controller for 220V AC RGB LED Strips (Strips of up to 50m in length and/or 720W) comes with an IR remote control (Infrared Signal) with 24 buttons and a 8-10 metre range, which is capable of remotely managing RGB channels efficiently from up to 10 metres away. With this controller it’s possible to select the desired colour and effect and at the same time regulate the brightness and speed of the transitions.

Working Modes:

-Turn ON light.

-Turn OFF light.

-Still light of any of the 16 available colours.

-Increase brightness.

-Decrease brightness.

-FLASH Mode: Flashing light.

-STROBE Mode: Flashing of the selected colour.

-FADE Mode: Light fades in and out (It goes through all 16 available colours, always starting with red).

-SMOOTH Mode: Light colour change (Red-Green-Blue).

At  Ledkia, our online lighting shop, we have a wide range of coloured strips available, including an RGB Strip, which allows you to control the colour of the LED strips to your liking by means of its controller

* Product made in accordance with your specifications, and therefore exempt from the right of withdrawal.