Coplanar Structure for Solar Panels assembly on Flat Sheet Metal & Concrete 105cm Wide

Our Solar Panel Structures are universal. They allow us to install any solar panel with a width between 100 and 112 cm. These structures are very easy to assemble since, depending on the number of panels to be installed in series, the necessary number of anchoring pieces, intermediate staples and final staples will be provided.

The Structure for Solar Panels is manufactured in Aluminum AL6005-T5 (Anodized) with screws in steel S304 INOX A2. This structure is anchored to the surface where it will be installed by means of an anchor piece. The customer must purchase separately the appropriate hardware for each application, threaded screws, chemical dowels, lag screws, ballasts, etc. In addition, a good seal between the anchor piece and the installation surface must be ensured to avoid leaks.

For a correct collection of solar energy, the solar panels should be installed with an approximate inclination of 30º. If an inclined surface is not available, the best option would be to opt for a 30º inclined structure for solar panels.

This structure supports a wind load of 1.5 kN/m² and complies with EN 1090-1:2009+A1:2011.

Components and dimensions of the kits:

*No. of Panels 1 : 2 x Coplanar Structure Guide 115cm, 4 x Anchor Piece Type L, 4 x End Clamp------->Dimensions width: 115 cm.

 *No. of Panels 2 : 2 x Coplanar Structure Guide 225 cm, 6 x L-type Anchor Piece, 2 x Intermediate Clamp, 4 x End Clamp ------->Dimensions width: 225 cm

 *No. of Panels 3 : 4 x Coplanar Structure Guide 180 cm, 2 x Splice Structure Guide, 8 x Anchor Piece Type L, 4 x Intermediate Clamp, 4 x End Clamp ------->Dimensions width: 360 cm
  
 *No. of Panels 4 : 4 x Coplanar Structure Guide 180 cm, 2 x Coplanar Structure Guide 115 cm, 4 x Structure Guide Splice, 8 x Anchor Piece Type L, 6 x Intermediate Clamp, 4 x End Clamp ------->Width dimensions: 475 cm     

*No. of Panels 5 : 4 x Coplanar Structure Guide 180 cm, 4 x Coplanar Structure Guide 115 cm, 6 x Structure Guide Splice, 10 x Anchor Piece Type L, 8 x Intermediate Clamp, 4 x End Clamp ------->Dimensions width: 590 cm   
 
*No. of Panels 6 : 8 x Coplanar Structure Guide 180 cm, 6 x Structure Guide Splice, 12 x L-Type Anchor Piece, 10 x Intermediate Clamp, 4 x End Clamp ------->Width dimensions: 720 cm 
  
*No. of Panels 7 : 2 x Coplanar Structure Guide 115 cm, 6 x Coplanar Structure Guide 225 cm, 6 x Structure Guide Splice, 14 x Anchor Piece Type L, 12 x Intermediate Clamp, 4 x End Clamp ------->Dimensions width: 790 cm    

*No. of Panels 8 : 8 x Coplanar Structure Guide 225 cm, 6 x Structure Guide Splice, 16 x L-Type Anchor Piece, 14 x Intermediate Clamp, 4 x End Clamp ------->Width dimensions: 900 cm    

*No. of Panels 9 : 2 x Coplanar Structure Guide 115 cm, 8 x Coplanar Structure Guide 225 cm, 8 x Structure Guide Splice, 16 x Anchor Piece Type L, 16 x Intermediate Clamp, 4 x End Clamp ------->Dimensions width: 1015 cm   
 
*No. of Panels 10 : 10 x Coplanar Structure Guide 225 cm, 8 x Structure Guide Splice, 18 x L-Type Anchor Piece, 18 x Intermediate Clamp, 4 x End Clamp ------->Width dimensions: 1125 cm

*This structure is compatible with panels with a thickness of 35 to 40 mm.
*The structures are designed for panels with a maximum width of 112 cm, in case of having a larger panel check the description for the total widths to choose the one that best suits.
*Fixing hardware is not included in the product.
*Be sure to use a good sealant to avoid leaks.