Coplanar Structure for Solar Panels Trapezoidal Plate

Our Solar Panel Structures are universal. They allow us to install any solar panel with a width between 100 and 113.4 cm. They are very easy to assemble as, depending on the number of panels to be installed in series, the necessary number of anchoring pieces, intermediate staples and final staples will be provided.

The Structure for Solar Panels is made of AL6005-T5 Aluminium (Anodised) with S304 INOX A2 steel screws. This structure is anchored to the surface where it is going to be installed by means of an anchoring piece. The customer must purchase separately the appropriate screws and bolts for each application, threaded screws, chemical plugs, lag screws, ballasts, etc. In addition, a good seal must be ensured between the anchoring piece and the installation surface to prevent leaks.

For a correct collection of solar energy, the solar panels should be installed with an approximate inclination of 30º. If an inclined surface is not available, the best option would be to opt for a 30º inclined structure for solar panels.

This structure withstands a wind load of 1.5 kN/m² and complies with EN 1090-1:2009+A1:2011.

Components and dimensions of the kits:

*No. of Panels 1 : 2 x Coplanar Structure Guide 115cm, 4 x Trapezoidal Support, 4 x PRO Guide Clamp, 4 x End Clamp, 4 x PRO Guide Clamp------->Width dimensions: 115 cm.

 *No. of Panels 2 : 2 x Coplanar Structure Guide 245 cm, 6 x Trapezoidal Support, 6 x PRO Guide Clamp, 2 x Intermediate Clamp, 4 x End Clamp ------->Dimensions width: 245 cm

 *No. of Panels 3 : 2 x Coplanar Structure Guide 115 cm , 2 x Coplanar Structure Guide 245 cm, 2 x Structure Guide Splice, 8 x Trapezoidal Support, 8 x Guide Clamp PRO, 4 x Intermediate Clamp, 4 x End Clamp ------->Dimensions width: 360 cm
  
 *No. of Panels 4 : 4 x Coplanar Structure Guide 245 cm, 2 x Structure Guide Splice, 10 x Trapezoidal Support, 10 x PRO Guide Clamp, 6 x Intermediate Clamp, 4 x End Clamp ------->Dimensions width: 490 cm     

*No. of Panels 5 : 2 x Coplanar Structure Guide 115 cm, 4 x Coplanar Structure Guide 245 cm, 4 x Structure Guide Splice, 10 x Trapezoidal Support, 10 x Guide Clamp PRO, 8 x Intermediate Clamp, 4 x End Clamp ------->Dimensions width: 605 cm   
 
*No. of Panels 6 : 6 x Coplanar Structure Guide 245 cm, 4 x Structure Guide Splice, 12 x Trapezoidal Support, 12 x Guide Clamp PRO, 10 x Intermediate Clamp, 4 x End Clamp ------->Dimensions width: 735 cm 
  
*No. of Panels 7 : 2 x Coplanar Structure Guide 115 cm , 6 x Coplanar Structure Guide 225 cm, 6 x Structure Guide Splice, 14 x Trapezoidal Support, 14 x Guide Clamp PRO, 12 x Intermediate Clamp, 4 x End Clamp ------->Dimensions width: 790 cm    

*No. of Panels 8 : 8 x Coplanar Structure Guide 225 cm, 6 x Structure Guide Splice, 16 x Trapezoidal Support, 16 x PRO Guide Clamp, 14 x Intermediate Clamp, 4 x End Clamp ------->Dimensions width: 980 cm    

*No. of Panels 9 : 2 x Coplanar Structure Guide 115 cm, 8 x Coplanar Structure Guide 225 cm, 8 x Splice Structure Guide, 18 x Trapezoidal Support, 18 x Guide Clamp PRO, 16 x Intermediate Clamp, 4 x End Clamp ------->Dimensions width: 1095 cm   
 
*No. of Panels 10 : 10 x Coplanar Structure Guide 225 cm, 8 x Structure Guide Splice, 20 x Trapezoidal Support, 20 x Guide Clamp PRO, 18 x Intermediate Clamp, 4 x End Clamp ------->Dimensions width: 1225 cm

*This structure is compatible with panels with a thickness of 35 to 40 mm.
*The structures are designed for panels with a maximum width of 113.4 cm, if you have a larger panel, check the description for the total widths to choose the one that best suits your needs.
*Fixing hardware is not included in the product.
*Be sure to use a good sealant to avoid leaks.