Voltage Range
220-240V AC
Max Wattage
400 W
Cut Out Dimensions
Ø73 mm
Diameter
73 mm
IP Rating
IP20
Dimensions
32 mm x Ø73 mm
Height
32 mm
Fitting Material
PC
Detention Range Metres
4 m
Ref. Ledkia: 100150
Colour : White
11,37 €
VAT includedIn Stock, delivery in 15-20 days
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentSee alternatives
Dimensions
Downloads
Technical Data Sheet PDF
Certificates and Stamps
Technical Specifications
Technical Information
Product Data
This PIR motion sensor has a versatile design that can be surface or recess mounted. It has a wide detection range of 360º , which allows it to cover a large area.
The sensor can detect motion at a maximum distance of 8 meters in ambient temperature conditions below 24℃. The delay time can be adjusted from 10 seconds to 7 minutes to customize how long the light stays on after motion is detected.
This motion sensor is powered by a 220-240V/AC 50/60Hz power supply and has a maximum load rating of 800W for incandescent lamps, or 400W for LED/energy saving lamps. It also has an ambient light setting, allowing you to customize the sensitivity of the sensor to the light in your environment.
The recommended installation height for this motion sensor is 2.5 to 4 meters on the wall, or 2 to 4 meters on the ceiling. It has an IP20 rating, which means it is protected against solid objects larger than 12.5mm , but it is not protected against the ingress of liquids. Therefore, it is recommended for indoor use.
This motion sensor is ideal for use in commercial and residential areas where automatic lighting is required. Its versatile design allows for easy installation in downlights or surfaces, making it ideal for renovations and new construction projects.
*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.