220V AC 120 LED/m Daylight 6000K - 6500K IP65 Solid Dimmable LED Strip Autorectified Custom Cut every 10 cm

The 220V AC 120 LED/m Daylight 6000K - 6500K IP65 Solid Dimmable LED Strip Autorectified Custom Cut every 10 cm is connected directly to the 220V mains, without the need for any additional power supply or rectifier. Its flexibility allows it to adapt to almost any surface.

Features of 220V AC 120 LED/m Daylight 6000K - 6500K IP65 Solid Dimmable LED Strip Autorectified Custom Cut every 10 cm

The 120 LED/m SMD 2835 LED strip consumes only 10W per meter. Manufactured with high quality materials, it presents the maximum protection against external agents of solid type and a magnificent protection against liquids that are summarized in the IP65 protection rating of the strip that makes it suitable for use both indoors and outdoors.

A cable with quick connector, plugs and pins are included with the 220V AC 120 LED/m Daylight 6000K - 6500K IP65 Solid Dimmable LED Strip Autorectified Custom Cut every 10 cm, which makes installation easier and avoids soldering. In addition, it does not require a rectifier due to its advanced self-rectifying system.

It allows cuts every 10 cm, always in the marked and soldered area. This means that in case of failure, only one section of the strip is affected and the other sections are not compromised. Its great flexibility allows it to be adjusted to the requirements of the space or element to be illuminated, although it is not possible to make straight or sharp angles.

Applications of 220V AC 120 LED/m Daylight 6000K - 6500K IP65 Solid Dimmable LED Strip Autorectified Custom Cut every 10 cm

The 220V AC 120 LED/m Daylight 6000K - 6500K IP65 Solid Dimmable LED Strip Autorectified Custom Cut every 10 cm is the perfect element to use as secondary lighting and/or decorative element in facades, ceilings, showcases and cabinets, shelves, shop windows, pictures and mirrors, and even for stairs and corridors marking. It can be installed both indoors and outdoors. An interesting option is to integrate it into a profile or trim for a more polished finish.

* For correct performance, greater durability and to avoid incidents, the connections must be protected with an insulating element against the humidity and water.

* LED strips should never be turned on when they are wound, this could cause overheating and burn the LEDs.

* It is not advisable to make installations of more than 50 meters per power supply as there is a risk of voltage drops.

* Product made in accordance with your specifications, and therefore exempt from the right of withdrawal.