This product is discontinued
Below you can find the substitute product or some equivalents.
If you have any queries, please call us on telephone (01) 486 3779.
Voltage Range
220-240V AC
Cut Points
10 cm
LED Strip Installation
50 m
Type Of Dimming
TRIAC
IP Rating
IP65
Luminous Efficiency
102 lm/W
Fitting Material
PCB, Epoxy Resin, Silicone
Colour Rendering Index
80
Ref. Ledkia: 87562
See alternatives
Downloads
Technical Data Sheet PDF
Certificates and Stamps
Technical Specifications
Technical Information
Product Information
Product Data
The 220V AC Dimmable Solid LED Strip in Warm White 120LED/m 14mm Width Cut at Every 10cm is connected directly to the 220V mains, without the need for any additional power supply or rectifier. Its flexibility allows it to adapt to almost any surface.
Features of the 220V AC Dimmable Solid LED Strip in Warm White 120LED/m 14mm Width Cut at Every 10cm
The 120 LED/m SMD 2835 LED strip consumes only 10W per metre. Manufactured with top quality materials, it offers maximum protection against solid external agents and excellent protection against liquids, which is summarised in the IP65 protection factor of the strip, making it suitable for both indoor and outdoor use.
The 220V AC Dimmable Solid LED Strip in Warm White 120LED/m 14mm Width Cut at Every 10cm includes a cable with quick connector, plugs and pins, which facilitates installation and avoids soldering. In addition, it does not require a rectifier due to its advanced self-rectifying system.
It allows cuts every 10 cm, always in the marked and soldered area. This means that in the event of a failure, only one section of the strip is damaged and the other sections are not affected. Its great flexibility means that it can be adjusted to the particularities of the space or element to be illuminated, although it is not possible to make right angles or acute angles.
Applications of 220V AC Dimmable Solid LED Strip in Warm White 120LED/m 14mm Width Cut at Every 10cm
The 220V AC Dimmable Solid LED Strip in Warm White 120LED/m 14mm Width Cut at Every 10cm is the perfect element to use as secondary lighting and/or decorative element on façades, ceilings, showcases and cabinets, shelves, shop windows, pictures and mirrors and even for staircase and corridor lighting. It can be installed both indoors and outdoors. An interesting option is to integrate it into a profile or moulding to achieve a more professional finish.
* For correct operation, greater durability and to avoid incidents, the connections must be protected with an insulating element against humidity and water.
* LED strips should never be switched on when they are wound, this could cause overheating and burn out the LEDs.
* It is not advisable to make installations of more than 50 metres per rectifier as there is a risk of voltage drops.
*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.