Wattage
7.4 W
Voltage Range
220-240V AC
IP Rating
IP20
Dimensions
90 mm x 35 mm x 63 mm
Width
35 mm
Height
90 mm
Fitting Material
ABS
Brand
WALLBOX
Current Intensity
100 A
Working Temperature
-25 °C~+40 °C
Official Warranty
WALLBOX
wallbox
Ref. Ledkia: 94236
Ref. Fab: MDDR-CH-LCTR-MNF
Wattage : 7.4 W
148,40 €
VAT includedIn Stock, estimated delivery from 3-5 weeks
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentSee alternatives
Dimensions
Downloads
Technical Data Sheet PDF
Certificates and Stamps
Technical Specifications
Technical Information
Product Data
The Single Phase Power Boost Energy Meter for Electric Car 100A WALLBOX is a device designed to measure and manage the electrical energy used in WALLBOX chargers for electric vehicles.
This device is installed in the electrical network of the home or company between the circuit breaker and the differential switch of the installation and the differential switch of the installation of the charging point.
When vehicle charging starts, the Single Phase Energy Meter begins to measure the amount of electrical energy being consumed, displaying it on an LCD screen.
The Single Phase Power Boost Energy Meter for Electric Car WALLBOX can also be connected to a remote monitoring network so electric vehicle owners can monitor charging progress and receive alerts if there are any problems with the charging process.
Operating Modes
Power Boost
Monitoring the amount of power being supplied to the WALLBOX charging point.
Eco Smart Solar Charging
Full-Green Mode: Charges the vehicle with 100% ecological energy. In this mode the system detects when there is enough surplus energy to supply the installation and at the same time charge the vehicle.
Eco Mode: Uses the surplus energy from the photovoltaic installation together with that of the grid to be able to charge the vehicle to its maximum charge.
*Complies with the international IEC/EN62053-21 and IEC/EN61557-12 standards.
*Certified according to MID Directive
*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.