Downloads

Technical Data Sheet PDF

Certificates and Stamps

Technical Specifications

Height12 mm
Width6 mm
Length1 m
Cut every5 cm
LED Strip Installation15 m
Tension48V DC
electrical insulation classII
DimmableYes
Light SourceSMD2835
Light colourRed
Luminous Efficiency30 lm/W
UseIndoor, Outdoor
IP protectionIP65
MaterialPVC
Ambient Working Temperature-10 °C~+50 °C
Battery operatedNo
Not includedController
WiFiNo
Lifespan30.000 hours
CertificatesRoHS, CE, UKCA
Number of LEDs per meter120 led/m
Power per meter8 W/m
Warranty3 years
Includes sensorNo
Contains batteryNo
Luminosity per Meter240 lm/m
Type of dimmingController

Description

The 48V DC Red NFLEX6 Neon LED Strip Cut at Every 5cm IP65 perfectly reproduces the visual effect of the old neon signs. Its flexible design adapts to any location where it will add a touch of colour.

Features of the 48V DC Red NFLEX6 Neon LED Strip Cut at Every 5cm IP65

Each metre of this 48V DC Red NFLEX6 Neon LED Strip Cut at Every 5cm IP65 integrates 120 high efficiency LEDs with a power consumption of 8W. The tubing has a translucent PVC cover that provides a uniform light and enhances its optical effect. Its great flexibility facilitates a simple installation without the need for specific tools, allowing it to adapt to all kinds of places such as logos or signs, although it is not possible to make right or acute angles. In addition, thanks to its ability to cut every 5 cm, we can adjust it to almost any space. In the accessories section you can find a 48V DC LED dimmer to complement your installation, allowing you to precisely control the brightness of the Neon. The dimmer can be controlled by a conventional push button switch or by a radio frequency remote control.

The Neon's electronics are perfectly protected against shocks and humidity, which gives it an IP65 protection factor that makes this type of LED lighting perfect not only for indoor but also for outdoor spaces.

Advantages of the 48V DC Red NFLEX6 Neon LED Strip Cut at Every 5cm IP65

The 48V DC Red Neon LED Strip 120LED/m Cut at Every 5cm IP65 is an innovative product that presents lighting with a high visual appeal. This, together with its versatility and high resistance, allows it to bend and create shapes, making this product the ideal lighting to create any design. It should be noted that it requires a power supply to operate and a maximum of 10 metres can be connected to a single power supply.

* The maximum length that can be connected by feeding one end of the neon is up to 10 metres continuously.

* The neon can be cut every 5 cm, exclusively in the area marked with a line.

* For correct operation and to avoid incidents, the connections must be protected with an insulating element against humidity and water.

* Never switch on the strips when they are coiled up, as this could cause overheating and burn the LEDs.

* It is recommended that the strips are in ventilated places without direct exposure to the sun and that they do not exceed 40ºC for a correct use.

*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.