Voltage Range
24V DC
Cut Points
10 cm
LED Strip Installation
10 m
Type Of Dimming
Controller
IP Rating
IP68
Width
10 mm
Height
4 mm
Fitting Material
PCB
Colour Rendering Index
80
Dimmable
Yes
Ref. Ledkia: 108180
Colour Temperature : Neutral White 4000K
24,99 €
VAT includedIn Stock, delivery in 15-20 days
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentSee alternatives
Dimensions
Downloads
Technical Data Sheet PDF
Certificates and Stamps
Technical Specifications
Technical Information
Product Information
Product Data
The 5m 24V DC SMD Silicone FLEX LED Strip 60LED/m 10mm Wide Cut at Every 10cm IP68 is a popular choice if you want to have a decorative light that consumes very little energy. Its flexible design adapts to any location where it will add a touch of colour.
Features of the 5m 24V DC SMD Silicone FLEX LED Strip 60LED/m 10mm Wide Cut at Every 10cm IP68
This strip is 5 metres long and features 300 highly efficient SMD2835 technology LEDs that consume only 5 watts per metre. The bright and colourful light emitted is spread over an angle of 120º. A power supply is required for operation.
The electronics of the LED Strip are coated with epoxy resin. It is perfectly protected against shocks and humidity, which gives it an IP68 protection factor that makes this type of LED lighting perfect not only for outdoor spaces, even under water.
This LED strip can be cut every 10 cm, i.e. it allows full use and adaptation of the LED strip to the desired space.
Advantages of LED Strip 5m 24V DC SMD Silicone FLEX LED Strip 60LED/m 10mm Wide Cut at Every 10cm IP68
Thanks to its extra flat design, this type of LED lighting achieves an ideal lighting effect for all types of projects with minimal visual impact. In addition, the strip includes a 3M adhesive strip that makes it very easy to install on almost any surface.
The versatility of the 24V DC SMD2835 LED Strip allows for a variety of applications such as accent lighting, decorative lighting or wayfinding. It sees a lot of use in spaces such as facades, pergolas, corridors, showcases, shelves, etc.
* For a correct operation and to avoid incidents, the connections must be protected with an insulating element against humidity and water.
* Never switch on the strips when they are coiled up, as this could cause overheating and burn the LEDs.
*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.