Voltage Range
12V DC
Cut Points
2.5 cm
LED Strip Installation
5 m
Type Of Dimming
Controller
IP Rating
IP65
Dimensions
3 mm x 8 mm x 5 Metro
Width
8 mm
Height
3 mm
Luminous Efficiency
100 lm/W
Fitting Material
PCB
Colour Rendering Index
80
Dimmable
Yes
Ref. Ledkia: 107565
Colour Temperature : Warm White 2700K
Before 16,99 €
13,69 €
VAT includedIn Stock, delivery in 15-20 days
Not Included Controller
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentSee alternatives
Dimensions
Downloads
Technical Data Sheet PDF
Certificates and Stamps
Technical Specifications
Technical Information
Product Information
Product Data
The 5m 12V DC SMD5050 LED Strip 120LED/m 8mm Wide Cut at Every 2.5cm IP65 is a popular choice if you want to have a decorative light that consumes very little power. Its flexible design adapts to any location where it will add a touch of colour.
Features of the 5m 12V DC SMD5050 LED Strip 120LED/m 8mm Wide Cut at Every 2.5cm IP65
This strip is 5 metres long and features 600 high efficiency SMD2835 technology LEDs that consume only 10 watts per metre. The bright and colourful light emitted is spread over an angle of 120º. A power supply is required for operation.
The electronics of the LED Strip are coated with epoxy resin. It is perfectly protected against shocks and humidity.
This LED strip can be cut every 2.5 cm, i.e. it allows full use and adaptation of the LED strip to the desired space.
Advantages of the 5m 12V DC SMD5050 LED Strip 120LED/m 8mm Wide Cut at Every 2.5cm IP65
Thanks to its extra flat design, this type of LED lighting achieves an ideal lighting effect for all types of projects with minimal visual impact. In addition, the strip includes a 3M adhesive strip that makes it very easy to install on almost any surface.
The versatility of the 5m 12V DC SMD5050 LED Strip 120LED/m 8mm Wide Cut at Every 5cm IP65 allows for a variety of applications such as accent lighting, decorative lighting or wayfinding. It sees a lot of use in spaces such as facades, pergolas, corridors, showcases, shelves, etc.
* For a correct operation and to avoid incidents, the connections must be protected with an insulating element against humidity and water.
* Never switch on the strips when they are coiled up, as this could cause overheating and burn the LEDs.
*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.