Presence detector LED T8 tubes

In addition to the above, there are features that specifically distinguish this type of luminaire, such as the automatic switch-off option that activates after 30 or 40 seconds of inactivity without detecting any movement.

The sensors of the LED tubes with presence detector have been designed to act as a radar, guaranteeing high precision and range, which makes them ideal even if they are included in enclosed luminaires.

In our catalogue you will find LED tubes with motion sensor for different power and brightness levels, and with a colour temperature between 6,000 and 6,500 K - Kelvin - corresponding to a cool white light colour.

The 2021 energy efficiency of LED tubes is A+ and their 2023 energy efficiency is F. They are guaranteed for 3 years and have an average lifetime of 50,000 hours, which is much longer than fluorescent tubes.

What are the benefits of motion sensors?

The two main advantages of all LED tubes are:

1. They do not contain hazardous components for humans and the environment.
2. They save on maintenance as no starters or resistors are needed.

In addition to the above, LED tube models with motion sensors have a number of advantages of their own:

• Energy saving. They are only activated when there is movement. There is no need to turn them on and, above all, to turn them off when you leave the room in which they are installed, because they have an automatic on/off function.
• Economic savings. Its consumption depends on the time of use and, as this is lower, it has a direct impact on the electricity bill.
• Greater respect for the environment. The optimisation of use provided by the automatic switch-off is directly linked to greater and better control of unnecessary consumption.

How do motion sensors work?

The operation of a LED tube with motion sensor is simple and consists of the sensor acting as a radar within a range of up to 8 metres and at an angle of up to 180 degrees, detecting movement and causing the LED tube to generate the full power it is capable of.

On the other hand, if after 30 to 40 seconds the sensor does not recognise any movement in its operating range, it stops generating any power and switches off automatically.